|
In architecture a jack rafter is one of the shorter rafters used in constructing a hip or valley roof; in the United States, the term applies to any secondary roof timber, like the common rafters resting on purlins in a trussed roof; and also, one of the pieces simulating extended rafters, used under the eaves in some styles of building.
Research Jack Rafter
In architecture the term jack timber is applied to any timber, such as a rafter, rib, or studding, which, being intercepted, is shorter than the others.
Research Jack Timber
In architecture a jack truss is a minor truss used in a hip roof, where the roof does not have its full section.
Research Jack Truss
In architecture, Jacobean refers to a style of architecture popular during the reign of James I which was characterised by the grafting of Classical details onto mediaeval-style buildings.
Research Jacobean
In architecture a jamb is the vertical side of any opening, such as a door or fireplace; hence, less properly, the term applies to any narrow vertical surface of a wall, such as the wall of a chimney- breast or of a pier, as distinguished from its face.
Research Jamb

The Jamieson Pot is an ornamental clay chimney pot usually 60 or 75 cm tall, with a distinctive two part body.
Research Jamieson Pot
Jaspe papers are wallpapers with a soft, irregular pattern giving the appearance of the surface having been combed or brushed.
Research Jaspe Papers
A jedding axe is a stone mason's tool, having a flat face and a pointed part.
Research Jedding Axe

In architecture a jerkinhead is the hipped part of a roof which is hipped only for a part of its height, leaving a truncated gable.
Research Jerkinhead

In architecture a jesse window is a window of which the glazing and tracery represent the tree of Jesse.
Research Jesse Window
In architecture a jetty is a part of a building that jets or projects beyond the rest, and overhangs the wall below.
Research Jetty
In architecture a jib door is a door made flush with the wall, without dressings or mouldings, often as a disguised or concealed door.
Research Jib Door
In architecture a joggle is a notch or tooth in the joining surface of any piece of building material to prevent slipping; sometimes, but incorrectly, applied to a separate piece fitted into two adjacent stones, or the like.
Research Joggle
In architecture a joggle joint is a joint in any kind of building material, where the joining surfaces are made with joggles.
Research Joggle Joint
In scaffolding, a joint pin or spigot, is an internal connection used for joining two metal tubes together, end to end. Joint pins are fitted with a screw by which the device can be expanded to grip the inside of the tubes firmly.
Research Joint Pin
A jointer is a bent piece of iron inserted to strengthen the joints of a wall.
Research Jointer
A jointing rule is a long straight rule, used by bricklayers for securing straight joints and faces.
Research Jointing Rule

In architecture a joist is a piece of timber laid horizontally, or nearly so, to which the planks of the floor, or the laths or furring strips of a ceiling, are nailed. The joints are called varying names according to their position or use, a binding joist, bridging joist, ceiling joist, trimming
joist, etc.
Research Joist

In architecture a jube is a chancel screen or rood screen. The term is also applied to the gallery above such a screen, from which certain parts of the service were formerly read.
Research Jube
A Judas slit, or Judas hole, is a peep-hole in a prison cell door through which a prison guard can look into the cell.
Research Judas Slit
In architecture a jump is an abrupt interruption of the level in a piece of brickwork or masonry.
Research Jump
A jumper is a long drilling tool used by masons and quarrymen.
Research Jumper
|