Artificial flowers are imitations of real flowers, made of various materials. These are not a modern invention. The Romans excelled in the art of imitating flowers in wax, and in this branch of the art attained a high degree of perfection. The Egyptian artificial flowers were made of thin plates of horn stained in different colours, sometimes also of leaves of copper gilt or silvered over. In modern times the Italians were the first to acquire celebrity for the skill and taste they displayed in this manufacture, but they are now far surpassed by English and French manufacturers, but more especially by the latter. During the Victorian period cambric, muslin, satin, velvet, and other woven fabrics, feathers, india-rubber, blown glass, mother of pearl, brass, etc were all employed in making artificial flowers, later silk and plastic were more commonly used, and good results may be had from dyed wood. Research Artificial Flowers
Auto da fe (Act of Faith) was the ritual execution of heretics by the Inquisition after a confession had been extracted. The ceremony always took place on a Sunday, but not at regular intervals, maybe once every two, three or four years. The victims were walked in procession wearing the sanbenito, the coroza, the rope around the neck, and carrying a yellow waxcandle in their hand. The sanbenito was a penitential tunic of yellow cloth reaching to the knees and painted on it was a picture of the person who wore it, burning in flames with figures of dragons and devils in the act of fanning the flames. The costume indicated to the watching crowds the wearer was to be burned alive as an incorrigible heretic. If the person was only to do penance, then the sanbenito had on it a cross, and no painting or flames. If the victim was converted just before being led out, then the sanbenito was painted with the flames downward (known as fuego resuelto) and indicated that the wearer was not to be burned alive, but to be first strangled before burning.
At one time the sanbenito were hung up in the churches as monuments to the Inquisition. The coroza was a pasteboard cap, one metre high, ending in a point. On it were likewise painted crosses, flames and devils. Gags were kept on hand in case a victim insulted the tribunal or revealed what had occurred to them as they were led along to the place of execution where a large scaffold was erected.
The stake where the victim was to be burned varied in form, and was either a simple stake mounted in the ground, or was about three metres tall, with a small board near the top where the victim sat and was chained to the stake. Following prayers and attempts to convert the victim to the Roman Catholic faith, burning furzes were thrust into the face until the victim's face was burned before furzes around the base of the stake were ignited and the victim burned to death.
Victims were burned, because the inquisitors were forbidden to 'shed blood', the Roman Catholic church maintaining the line that it is untainted with blood. Research Auto da Fe
China Wax is a sort of wax deposited by insects on a deciduous tree with light-green ovate, serrated leaves, cultivated in the province of Sichuen in South-western China. The insects, a species of Coccus, are bred in galls which are formed on a different tree, an evergreen (a species of Ligustrum or privet), and these galls are transported in great quantities to the districts where the wax trees are grown, to the branches of which they are suspended. Having emerged from the galls the insects spread themselves over the branches, which gradually become coated with a white waxy substance, reaching in 90 or 100 days the thickness of a quarter of an inch. The branches are then lopped off and the wax removed. It is white in colour and is chiefly made into candles; it melts at 160 degrees whereas tallow melts at about 95 degrees Fahrenheit. Research China Wax
Cold Cream is a cooling ointment prepared in various ways. A good variety may be made by heating four parts of olive-oil with one of white wax. This ointment cools the skin, rendering it soft and pliable, and was formerly successfully applied for the cure of chapped hands. Research Cold Cream
Encaustic is a term used to describe a picture painted by means of heated wax. Encaustic painting is an ancient technique that was practised by the Greeks and Romans using melted beeswax. At the close of the 18th century experiments were made by Emma J Greenland to ascertain the ancient methods; but the process, in which gummastic and wax were the principle vehicles used, produced neither so brilliant a tint nor so durable a texture as oil painting. Research Encaustic
Engraving is the art of representing objects and depicting characters on metal, wood, precious stones, etc, by means of incisions made with instruments variously adapted to the substances operated upon and the description of work intended.
Impressions from metal plates are named engravings, prints, or plates those printed from wood being called indifferently wood engravings and wood-cuts. While, however, these impressions are not altogether dissimilar in appearance, the processes are distinct. In plates the lines intended to print are incised, and in order to take an impression the plate is daubed over with a thick ink which fills all the lines. The surface is then wiped perfectly clean, leaving only the incised lines filled with ink. A piece of damp paper is now laid on the face of the plate, and both are passed through the press, which causes the ink to pass from the plate to the paper. This operation needs to be repeated for every impression, for the wood block, on the contrary, the spaces between the lines of the drawing are cut out, leaving the lines standing up like type, the printing being from the inked surface of the raised lines, and effected much more rapidly than plate printing.
Engraving on wood, intended for printing or taking impressing from, long preceded engraving on metals. The art is of eastern origin, and at least as early as the 10th century engraving and printing from wood blocks was common in China. We first hear of wood engraving being cultivated in Europe by the Italians and Germans in the 13th century. For a hundred and fifty years, however, there is small indication of the practice of the art, which was at first confined to the production of block-books, playing cards, and religious prints. In the 15th century the art of printing from engraved plates was discovered in Florence by Maso Finiguerra.
Engraving had long been used as a means of decorating armour, metal vessels, etc, the engravers generally securing duplicates of their works before laying in the niello (a species of metallic enamel) by filling the lines with dark colour, and taking casts of them in sulphur. The discovery of the practicability of taking impressions upon paper led to engraving upon copper plates for the purpose of printing from.
The date of the earliest known niello proof upon paper is 1452. The work of the Florentine engravers, however, was almost at once surpassed in Venice and elsewhere in North Italy by Andrea Mantegna, Girolamo Mocetto, Giovanni Batista del Porto, and others. In Marc Antonio Raimondi, who wrought under the guidance of Raphael, and reproduced many of his works, the art reached its highest point of the earlier period, and Rome became the centre of a new school, which included Marco da Ravenna, Giulio Bonasone, and Agostino de Musis.
In the meantime, in Germany the progress of the art had been not less rapid. Of the oldest school the most important engraver is Martin Schongauer. He was, however, surpassed a generation later by Albert Durer who excelled both in copper and wood engraving, especially in the latter. Among his most famous contemporaries and successors were Burgkmair and Lucas Cranach. The Dutch and Flemish schools, of which Durer's contemporary Lucas van Leyden was the head, did much to enlarge the scope of the art, either by paying increased attention to the rendering of light and shade, and the expression of local colour, as in the case of Cornelius Cort and Bloemart; or by developing freedom and expression of line, as in the case of Goltzius and his pupils.
Rubens influenced engraving through the two Bolswerts, Vorstermann, Pontius, and de Jode, who engraved many of his works on a large size. Towards the end of the 17th century etching, which had before been rarely used, became more common, and was practised with great success by Rembrandt and other painters of that period. In France Noel Garnier founded a school of engraving about the middle of the 16th century; but it produced no work of any high distinction until the reign of Louis XIV, when Nanteuil's pupil Gerard Edelinck and Gerard Audran flourished. The former was skilled in using his graver to produce colour effects, the latter is famed for his engravings from Nicolas Poussin and Le Brun. But these were all surpassed about the middle of the 18th century by Wille, a German resident in Paris.
Before the middle of the 17th century England produced little noteworthy work, availing herself principally of the work of foreign engravers, of whom many took up temporary and even permanent residence. The first English engraver of marked importance was William Hogarth, whose works are distinguished for character and expression. Vivares, a Frenchman by birth, laid the foundation of the English school of landscape-engraving, which was still further developed by William Woollet, who was also an excellent engraver of the human figure.
In historical engraving a not less remarkable advance was made by Sir Robert Strange, and Richard Earlom produced some admirable works in mezzotint. In succession to these came William Sharp, James Bazire, Bartolozzi, James Heath, Bromley, Raimbach, and others.
The substitution of steel for copper plates around 1820 to 1830 gave the power of producing a much larger number of fine impressions, and opened new possibilities for highly-finished work.
During the closing years of the 18th century line engraving attained a depth of colour and fulness of tone in which earlier works generally are deficient, and during the following century it reached a perfectness of finish which it had not previously attained. A picture, whether figure or Landscuape, may be translated by line engraving with all its depth of colour, delicacy of tone, and effect of light and shade; the various textures, whether of naked flesh, silk, satin, woollen, or velvet, all successfully rendered by ingenious modes of laying the lines and combinations of lines of varying strength, width, and depth. Among engraverswho have produced historical works of large size and in the line manner the names of Raphael Mrghen, Longhi, Anderloni, Garavaglia, and Toschi, in Italy; of Forster, Henriquel-Dupont, Bridoux, and Blanchard, in France; of John Burnet, J H Robinson, Doo, J H Watt, and Lumb Stocks, in England, stand pre-eminent.
Among historical and portrait engravers in the stipple or dotted manner the names of H T Ryall, Henry Robinson, William Holl and Francis Holl, may well be mentioned.
In the period 1820 to 1860 landscape engraving attained a perfection in Great Britain which it had not attained in any other country, or at any other time. Among landscape engravers the names of George Gooke, William Miller, E Goodall, J Cousen, K Brandard, and William Forrest hold the foremost places. In mezzotinto engraving Samuel Cousins is unrivalled.
In the period 1830 to 1845 various publications called Annuals, composed of light literature in prose and verse, and illustrated by highly-finished engravings in steel, were very popular. The engravings were necessarily of small size, and are generally of great excellence. A number of them both figure and landscape are executed with such finish and completeness as to be esteemed perfect works. The unrivalled illustrations of Rogers' Poems and Rogers' Italy after Turner and Stothard belong to this period. Many of the originals of the engravings in the Annuals were finished pictures of large size.
A great part of the difficulty in engraving on a small scale from a large picture, consists in determining what details can be left out, and still preserve the full effect and character of the original. The most noted engravers for work of small size are Charles Heath, Charles Bolls, W Finden, E Finden, E. Portbury, J Goodyear, F Engleheart, Henry Le Keux, E Goodall, and W Miller.
After 1870 many plates were produced by a combination of etching and dry point, a comparatively cheap and rapid process. Such works were fashionable and very popular with collectors. But while some of them have been excellent of their kind, the process is of limited resource, and the best works in this manner will not stand comparison with the masterpieces of line engraving. Through lack of encouragement, change of fashion, and the adoption of other methods of reproduction such as photography, line engraving rapidly becoming a lost art in Great Britain. The men who made line engraving famous died, and there was no sufficient inducement for younger men to pursue that art. In France and in Germany some able line engravers were still in practice at the start of the 20th century.
Line Engraving, as implied by the term, is executed entirely in lines. The tools are few and simple. They consist of the graver or burin, the point, the scraper, and the burnisher; an oil-stone or hone, dividers, a parallel square, a magnifying lens; a bridge on which to rest the hand; a blind or shade of tissue paper, to make the light fall equally on the plate, callipers for levelling important erasures, a small steelanvil, a small pointed hammer, and punches. In etching, the following articles are required: a resinous mixture called etching-ground, capable, when spread very thinly over the plate, of resisting the action of the acids used; a dauber for laying the ground equally; a hand-vice; some hair-pencils of different sizes, and bordering wax, made of burgundy-pitch, bees'-wax, and a little oil.
In engraving, the plate, which is highly polished and must be free from all scratches, is first prepared by spreading over it a thin layer of ground. The surface is then smoked, and the outline of the picture transferred to it by pressure from the paper on which it has been drawn in fine outlines by a black-lead pencil. The picture is then drawn on the ground with the etching-needle, which removes the ground in every form produced by it, and leaves the bright metal exposed. A bank of wax is then put round the plate and diluted acid poured on it, which eats out the metal from the lines from which the ground has been removed, but leaves the rest of the plate untouched. The plate is then gone over with the graver, the etched lines clearly defuned, broken lines connected, new lines added, etc. Sometimes the plate is rebitten more than once, those parts which are sufficiently bitten in the first treatment being stopped with varnish, and only the selected parts exposed to after-biting. Finally the burnisher is brought into play alternately with the graver and point to give perfectness and finish.
Such is the process for landscape engraving. In historical and portrait engraving of the highest class, the lines are first drawn on the metal with a fine point and then cut in by the graver, first making a fine line and afterwards entering and re-entering till the desired width and depth of lines is attained. Much of the excellence of such engravings depends on the mode in which the lines are laid, their relative thickness, and the manner in which they cross each other. In historical engraving etching is but little used, and then only for accessories and the less important parts.
In Soft-ground Etching the ground, made by mixing lard with common etching-ground, is laid on the plate and smoked as before, but its extreme softness renders it very liable to injury. The outline of the subject is drawn on a piece of rough paper larger than the plate. The paper is then damped, and laid gently over the ground face upwards, and the margins folded over and pasted down on the back of the plate. When the paper is dry and tightly stretched the bridge is laid across, and with a hardish pencil and firm pressure the drawing is completed in the usual manner. The pressure makes the ground adhere to the back of the paper at all parts touched by the pencil, and on. the paper being lifted carefully off, these parts of the ground are lifted with it, and the corresponding parts of the plate thus left bare are exposed to the subsequent action of the acid. The granulated surface of the paper, causing similar granulations in the touches on the ground, gives the character of a chalk-drawing. The biting-in is effected in the same manner as already described, and the subject is finished by re-biting and dotting with the graver.
Stipple, or Chalk Engraving, in its pure state, is exclusively composed of dots, varying in size and form as the nature of the subject demands, but few stipple plates are now produced without a large admixture of line in all parts, flesh excepted. A great advance, however, was made in stipple engraving by the introduction of large and varied forms of dotting in the draperies, the results almost rivalling line engraving in richness and power.
The Mixed Style is based on mezzotinto, which, still forming the great mass of shading, is in this method combined with etching in the darker, and stipple in the more delicate parts. By this combination a plate will produce a larger number of good impressions than were it done entirely in mezzotinto.
The wood best adapted for engraving is box. It is cut across the grain in thicknesses equal to the height of type, these slices being subjected to a lengthened process of seasoning, and then smoothed for use. Every wood engraving is the representative of a finished drawing previously made on the block; the unshaded parts being cut away, and the lines giving form, shading, texture, etc, left standing in relief by excavations of varied size and character, made between them by gravers of different forms. Drawings on wood are made either with black-lead pencil alone or with pencil and indian ink, the latter being employed for the broader and darker masses. It is now much the practice to photograph drawings made in black and white upon the wood instead of making the drawing on the wood block. When the drawing is put on the wood by washes or by photography instead of being entirely done by pencil lines, the engraver has to devise the width and style of lines to be employed instead of cutting in facsimile, as is the case when the drawing is made entirely in lines. The tools required for wood engraving are similar but more numerous than those of the engraver on copper or steel. Research Engraving
A flambeau is a sort of torch or light made of some sort of thick wick covered with wax or other inflammable material, and used at night in illuminations, processions, etc. Research Flambeau
A herse or hearse was oriiginally a framework whereon lighted candles were placed at the obsequies of distinguished persons. The funeral herse of the middle ages was a temporary canopy
covered with wax-lights, and set up in the church; the coffin was placed under the herse during the funeral ceremonies. Sometimes it was a very elaborate structure. The name has been transferred to the modern carriage for bearing a dead body to the grave. Research Herse
Honey-comb is a waxen cellular structure framed by the bees to deposit their honey and eggs in. The wax is secreted by the insect in the form of small and thin oval scales in the folds of the abdomen. The comb is composed of a number of cells, most of them exactly hexagonal, and arranged in two layers placed end to end, the openings of the layers being in opposite directions. The comb is placed vertically, the cells being therefore horizontal. The sides of the cells are very thin, and yet the whole structure is of considerable strength. Some cells are destined for the exclusive reception of honey; others for the reception of larvae. Research Honey-comb
The Probert Encyclopaedia was designed, edited and programed by
Matt and Leela Probert
Abbreviations
Research Artificial Flowers
